Advik Bluetooth Dongle Driver Zip |work| May 2026

Because Advik manufactures several different models of Bluetooth dongles (using different chipset brands like Realtek, Broadcom, or Cambridge Silicon Radio), there isn't one single driver for all of them.

Issue 3: Audio Sounds Robotic or Stutters

Solution: This is a classic CSR buffer issue. Open the CSR Harmony Control Panel (installed via the ZIP). Go to Audio settings. Increase the “Buffer Delay” to 120ms and disable “Low Latency Mode.” advik bluetooth dongle driver zip

The "Advik Bluetooth dongle" story is often one of troubleshooting older tech to meet modern needs. Typically, these devices are marketed as simple solutions to add wireless audio to non-Bluetooth speakers or cars. Finding and Installing the Driver Do not lose the ZIP file; drivers may

Method 3: The “Driver ZIP” via Archive.org

The classic Advik Bluetooth dongle driver zip file (approx 35MB) can often be found on the Internet Archive (archive.org). Search for “CSR BlueCore 04-1180 driver.” This ZIP typically contains: Other Devices &gt

Q2: Does the Advik dongle work on macOS?
A: Only if it uses a Broadcom chipset (rare). Most Advik dongles are not macOS-friendly. The driver zip is Windows-only. Consider a natively supported dongle (e.g., IOGEAR, Plugable) for Mac.

Manufacturer Support: For specific issues, you can contact local service providers like Advik Pos Services who deal with Advik-branded hardware in regions like Dehradun. Troubleshooting Installation If you have a .zip file and need to install it manually:

Important Notes

• Do not lose the ZIP file; drivers may not be available on the official Advik website for older models.
• Some antivirus software may flag Setup.exe as suspicious – verify the file hash if needed or temporarily disable AV during install.
• For macOS or Linux, the dongle often works with native Bluetooth stacks without needing the ZIP driver.

• Setup.exe – Main driver installer
• *.inf – Driver configuration files
• *.sys – System driver files
• README.txt – Installation notes
• x86 & x64 folders – Architecture-specific drivers

1. Plug in the Advik dongle.
2. Open Device Manager > Other Devices > Unknown Device.
3. Right-click > Update driver > Browse my computer for drivers.
4. Click Let me pick from a list of available drivers.
5. Click Have Disk > Browse.
6. Navigate to the extracted ZIP folder and select the .inf file (typically csrbt.inf, btwle.inf, or rtkbt.inf).
7. Click OK. Select “Bluetooth Radio (CSR)” from the list.
8. Ignore the compatibility warning. Click Yes to install.