Ats-20 Radio Manual -
: Attach the included rubber feet to the bottom of the metal case to prevent sliding. Antenna Connection : Connect the telescopic antenna to the BNC connector
Warning: This voids any warranty and requires moderate technical skill. ats-20 radio manual
- Ambiguous specs: Always specify measurement conditions.
- Sparse diagrams: Add labeled, high-resolution images of panels and connectors.
- Missing parts data: Include full parts list and ordering codes.
- Limited troubleshooting: Provide step-by-step diagnostic flows and typical voltage readings.
- No firmware/update guidance: Add update procedures and recovery steps.
- Poor indexing: Add a detailed index and hyperlinks in digital versions.
ATS-20 Radio: Quick Start & Operation Manual
1. What’s in the Box? (Typical)
- ATS-20 radio unit
- USB-C charging cable (5V only – do not use fast chargers)
- Removable 18650 lithium battery (may be included or sold separately)
- Small wire antenna (for shortwave)
- User manual (often poorly translated)
on top. For better performance on shortwave (SW), consider using a dedicated external wire antenna. USB-C port : Attach the included rubber feet to the
is highly recommended for picking up weak Shortwave or SSB signals. Are you interested in instructions for flashing a specific firmware version like Goshante or PU2CLR? Ambiguous specs: Always specify measurement conditions
- 20-meter amateur radio band operation
- FM mode
- 5 watts of output power
- 16 channels
- CTCSS (Continuous Tone-Coded Squelch System) and DCS (Digital Coded Squelch) capabilities
- VOX (Voice Operated Transmit) functionality
- Built-in flashlight
