Baofeng Bf-1909 Software -

Baofeng BF-1909 Go to product viewer dialog for this item. Software: The Complete Programming Guide The Baofeng BF-1909

Note: The .dat file from the BF-1909 software is not compatible with UV-5R or other Baofeng CPS. Each model has its own format. baofeng bf-1909 software

Part 11: Legal and Compliance Considerations

Before programming your BF-1909, understand your country’s radio regulations. Baofeng BF-1909 Go to product viewer dialog for this item

Power off both radios.

Connect the cloning cable to the speaker/mic jacks.

On the source radio: Hold PTT + Side Key 1 while powering on. Display shows "CLONE."

On the target radio: Hold PTT + Side Key 2 while powering on. Display shows "RECEIVE."

Press PTT on the source radio to begin transfer.

Computer: The software typically runs on Windows (XP through 11), though CHIRP also supports macOS and Linux. Where to find software for Baofeng BF-1909 HT? - Facebook Power off both radios

Rx Frequency: 462.550 (GMRS/FRS channel example)

Tx Frequency: 462.550 (same as receive for simplex)

Rx CTCSS: off or 67.0

Tx CTCSS: same as above

Power: Low (if nearby) or High (if distance)