Bcl 4562 Manual Full //free\\ Today

The BCL 4562 is a terminal board (or daughterboard) often paired with the FSCUT series laser cutting control systems (such as the FSCUT2000 or FSCUT1000). It functions as the physical interface for wiring servos, limit switches, and auxiliary I/O to the main control card.

Motor Control: Supports pulse output for X, Y1, and Y2 axes with a maximum frequency of 3MHz. Power Supply: Operates on a 24V DC / 2A input. Input Ports: bcl 4562 manual full

| Parameter | Function | Default | Recommended Setting | |-----------|----------|---------|----------------------| | Symbology | Code types enabled | Code128, QR | All required types | | Trigger Mode | External, continuous, or self-trigger | External | Based on conveyor speed | | Good Read LED | Duration of green flash | 200 ms | 100–300 ms | | Match Code | Compare against a stored string | Disabled | Enable for validation | | Output Interface | RS232, Ethernet TCP/IP, or USB | RS232 | Match your PLC/HMI | The BCL 4562 is a terminal board (or

Laser Setup: When using a fiber laser, the PWM output must be enabled in the config to activate laser modulation. Power Supply: Operates on a 24V DC / 2A input

Dedicated Outputs: 2 DA outputs (0–10V, 50mA) and 1 PWM output (5V/24V). Power Supply: 24V DC / 2A.  📖 Manual & Documentation 

To change these values, follow section 6.3 of the full manual (command table included).