Canon Mf Lbp Network Setup Tool Windows 10 Download [better]

The Canon MF/LBP Network Setup Tool is a utility designed to configure initial network settings for Canon imageCLASS and i-SENSYS printers. On Windows 10, it is typically bundled within the printer's driver package rather than as a standalone download, though manual execution is possible once the package is extracted. Download and Access Methods

Step 1: Physical Connection

Ensure your printer is powered on and connected to the same router (Ethernet) or Wi-Fi network as your Windows 10 PC. If setting up via Wi-Fi for the first time, you may need to use the printer's control panel to select your network first. canon mf lbp network setup tool windows 10 download

Steps to Download:

Note: If you have a very new “MAXIFY” or “imageRUNNER ADVANCE” model, this specific tool may be deprecated. Use Canon’s “Network Setup Tool for UFR II” instead. The Canon MF/LBP Network Setup Tool is a

Example: Quick static IP setup (concise steps)

Run Network Setup Tool → Discover printer.
Select printer → Choose Manual IP.
Enter IP 192.168.1.50, Subnet 255.255.255.0, Gateway 192.168.1.1.
Apply → Restart printer.
In Windows, Add printer by IP 192.168.1.50 → Install Canon driver → Test page.

Fix 2: Turn on Network Discovery

Open Control Panel > Network and Sharing Center > Advanced sharing settings.
Select “Turn on network discovery”.
Check “Turn on automatic setup of network connected devices”.
Click Save changes.

If you have followed this entire guide and your Canon MF or LBP still does not respond, check your physical Ethernet cable and router port. Sometimes, the simplest hardware fixes are the final answer. Run Network Setup Tool → Discover printer