Code Soft Tp-3160s Driver Review

The Ultimate Guide to the Code Soft TP-3160S Driver: Installation, Troubleshooting, and Optimization

If you are in the market for a reliable industrial barcode label printer, the Code Soft TP-3160S is likely on your radar. Known for its rugged build quality, high-speed thermal transfer printing, and exceptional print clarity for small fonts and barcodes (thanks to its 300 DPI resolution), this printer is a workhorse in logistics, retail, and manufacturing environments.

CODE SOFT TP-3160S * Both of Epson ESC/POS and STAR commands supported.250mm/sec ultra high printing speed. * Bar code printing. * newpages.com.my How to Add a Printer Driver in CODESOFT 16 Mar 2020 — code soft tp-3160s driver

Step 1: Identify Your Operating System

The TP-3160S supports:

Select your Operating System (e.g., Windows 10 or Windows 11). Choose the Printer Interface. Most users will select USB. The Ultimate Guide to the Code Soft TP-3160S

• Affordable: Costs significantly less than big-name competitors.
• Dual Mode: Supports both Direct Thermal (no ribbon) and Thermal Transfer (with ribbon), giving you flexibility in label materials.
• Compact Size: Takes up very little desk space.
• Decent Print Quality: Sharp enough for shipping labels and inventory tags.

• Clean the paper sensor with a dry cotton swab (located near the paper feed).
• Reduce the custom page size by 0.1 inches in driver preferences.
• Re-calibrate using the Feed button method.

Manual Calibration Process:

1. Power off the printer.
2. Hold the Feed button (the only button on the chassis).
3. Power on the printer while still holding the button.
4. Wait for the status light to flash amber (or red/white depending on firmware).
5. Release the button. The printer will feed 3–5 labels and then stop. Calibration is complete.