Elstat Ems 25 Advanced Manual
The EMS 25 Advanced is designed to learn store opening and closing times to save energy. Ready Mode
- Press and hold the "SET" button for 3 seconds until the display flashes "St1" or the current setpoint.
- Release the button.
- Press and hold the "SET" button again for an additional 7 seconds.
- The display will change to show a parameter code (e.g., "/C" or "PA").
- Use the arrow keys to navigate to "PA" (Password Access).
- Press "SET" again. Use the arrows to input the password. (Note: The default password is often "0" or "55" per the EMS 25 manual—check your specific revision. If changed by a previous technician, a hard reset via the manual is required).
or motion counts to indicate an active 30 relay, or to keep the lights on at all times, minute period in the self-learning matrix. Elstat EMS25 Plus User Guide | PDF | Temperature - Scribd Elstat Ems 25 Advanced Manual
- Re-trim polarity balance using a neutralized test plate.
- Inspect emitter pins for damage; swap polarity channels to isolate hardware faults.