Epson M2120 Resetter

Epson M2120 Resetter (also known as an Adjustment Program or WIC Utility) is a software tool used to fix the "Service Required" "E-11 Ink Pad Needs Service"

1. Open the front cover.
2. Locate the maintenance box on the bottom right (a black plastic container).
3. Pull it out and dispose of it properly (it contains liquid ink).
4. Insert a new OEM or compatible maintenance box (approx. $20–$30).
5. Then use the resetter to clear the counter.

However, if you are not technically inclined or you see ink leaking from the printer, do not attempt a reset—send the device to an Epson service center. Epson M2120 Resetter

What Causes This Error?

Before you panic and think your printer is broken, it is important to understand why this happens. Epson printers are designed with a waste ink pad inside. Every time the printer cleans its print head or performs a maintenance cycle, a small amount of ink is flushed into these pads to prevent clogging. Epson M2120 Resetter (also known as an Adjustment

Print Head Cleaning: Executes deep cleaning cycles to fix poor print quality. Open the front cover

Step-by-Step Guide: Using the Epson M2120 Adjustment Program

This is the most common method. Disclaimer: Using third-party resetter tools may void your warranty. Proceed at your own risk.