How To Reset Epson L3250 Using Resetter Adjustment Program Verified ❲Validated ✓❳

⚠️ Critical Warning:
Resetting the counter without servicing the printer will cause ink to overflow inside the printer, damaging the logic board and other components.
You must physically replace or clean the waste ink pads before running the resetter.

Step 4: Finalize & Test

1. Turn off the printer.
2. Wait 10 seconds, turn on normally.
3. Print a nozzle check:

   What is the Resetter Adjustment Program? Turn off the printer

   Disable Antivirus: Temporarily turn off Windows Defender or any third-party antivirus, as they often flag these utilities as false positives. After the printer restarts

   If you cannot use software, you can try a manual maintenance mode reset: the printer. Resume (paper) button and the button simultaneously for 5 seconds. but keep holding for another 5 seconds. four times once to apply the reset and restart the printer. HOW TO RESET EPSON L3250 PRINTER Turn off the printer

   Option A – Pad Replacement

   • Disassemble printer, remove old ink-soaked pads (usually under the right side).
   • Replace with new absorbent pads or generic ink pads.

   After the printer restarts, the flashing red lights should stop. You can verify the reset by clicking

   Step-by-step reset procedure (typical verified workflow)

   from the Model Name list and ensure the correct USB port is selected. Enter Adjustment Mode : Click on Particular Adjustment Mode on the main screen. Waste Ink Pad Counter : Locate and select Waste ink pad counter from the maintenance list, then click Check and Initialize Check the boxes for Main Pad Counter Platen Pad Counter Ink System Pad Counter (options may vary slightly by version).