How To Reset Sharp Ar-6020 [cracked] May 2026

To reset the Sharp AR-6020, you must Simulation Mode using a specific key sequence to clear maintenance counters or technical error codes The Reset Procedure

1. Enter Simulation mode.
2. Key in 16 → Press Start until you see "U2" related option.
3. Press Start to execute clear.
4. Turn off/on.

Important Warnings

• Do not run Simulation 16 unless the developer unit is in good condition. Running it with old developer can cause "L" (low toner) errors.
• Simulation 56 will erase tray settings, auto power shutoff, and network settings (if a printer kit is installed).
• For H5-01 (fuser overheat hard lock), you cannot reset it without replacing the fuser thermistor or thermostat.

• Sim 14: Clears most "H" codes (like H4, which indicates a fuser error). Enter 14, press Start, select "1" to execute.
• Sim 21: Resets the memory/initialization.
• Sim 24: Resets the copy counter.

Part 3: Fixing and Resetting Paper Jams (J Code)

A common frustration is a paper jam that persists even after you have removed the paper. The Sharp AR-6020 has several jam codes (J0, J1, J2, J3, J4). how to reset sharp ar-6020

1. Open the front cover.
2. Turn the main power on.
3. Wait for the machine to display a maintenance code.
4. Close the front cover. (Sometimes auto-reset occurs).
5. If not, enter Simulation 25-01 (Developer count reset) or 42-01 (Toner counter reset):