Hp Probook 450 G2 M2 Ssd Compatibility ((new)) Instant

The HP ProBook 450 G2 is compatible with M.2 SATA SSDs in the 2242 form factor (42mm length). This specific slot is located near the Wi-Fi card and does not support faster M.2 NVMe/PCIe drives. Compatibility and Specifications

3. How to Check Your Motherboard for mSATA (Before Buying)

1. Power off, remove battery, hold power button 10 sec.
2. Remove bottom cover (Phillips screws).
3. Locate the 2.5" drive bay and Wi-Fi card.
4. Look for a small card slot (~30 mm wide) with two mounting holes – that’s mSATA.
5. If absent, you cannot use mSATA or M.2.

Recommended drives (based on form factor)

• 2.5" SATA SSDs: Samsung 870 EVO, Crucial MX500, Western Digital Blue.
• M.2 SATA (if using adapter): Crucial M5 or similar M.2 SATA drives.
• Avoid NVMe unless you have verified PCIe support (very unlikely on this model).

1. Install small mSATA SSD (e.g., Kingston mS200, Transcend 128GB) as OS drive.
2. Keep 2.5" HDD for files.

• Do: Buy an M.2 2280 SATA III SSD.
• Don't: Buy an NVMe drive.
• Warning: Be aware that adding an M.2 drive might disable your 2.5-inch drive bay.

Speed Bottleneck: Since it uses the SATA interface, an M.2 drive will perform at the same speed as a standard 2.5-inch SATA SSD (approx. 500-550 MB/s). You will not get the gigabit-plus speeds seen in modern NVMe drives. hp probook 450 g2 m2 ssd compatibility