Skip to content

Ice Irp 260 Printer Driver Download [verified] Page

Setting Up Your iCE IRP-260 Thermal Printer: A Quick Guide If you’ve just added an iCE IRP-260 (or IRP-260+)

Step-by-Step Installation (Windows)

  1. Do not connect the printer yet.
  2. Download the driver .exe or .inf file.
  3. Run the installer as Administrator.
  4. Select “USB” when prompted (unless using Serial/Ethernet).
  5. Connect the printer only when the installer says “Plug in the device now.”
  6. Windows will finalize the installation.
  7. Print a test page:

    : After installation, go to the printer's properties, navigate to the tab, and select the USB port you identified in Step 1. Test Print Print Test Page button on the "General" tab to verify functionality. Key Specifications Print Speed Up to 260mm/sec USB, Serial, and 100M Ethernet Paper Width 80mm roll (72mm print width) Compatibility ESC/POS command sets Operating Systems Windows (9x through 11), Linux, and legacy systems Printer Driver Downloads and Software - BarTender ice irp 260 printer driver download

    Conclusion

    When asked for the interface, select the port you are using (e.g., USB001 or COM1). Step 3: Configuration Open Control Panel > Devices and Printers. Find the ICE IRP-260 icon. Right-click it and select Printer Properties. Print a Test Page to confirm successful communication. 🔍 Troubleshooting Common Driver Issues Setting Up Your iCE IRP-260 Thermal Printer: A

    2. Contact your reseller or distributor

    The fastest safe method: email the company from whom you purchased the printer. Provide them with: Do not connect the printer yet