Jmm-al10 Test Point [updated] ⚡ Quick

Topic: JMM-AL10 Test Point Device Model: Huawei Honor 6C Pro / Honor 7 Lite / Huawei Y7 (depending on region, JMM-AL10 is typically the Honor 7 Lite / Y7 Prime 2017 variant).

FRP Bypass: Removing Google account locks after a hard reset.

How to identify and access it safely

1. Power off device and remove back cover and battery (if removable).
2. Use a magnifier to locate labeled pads (small metal circles/rectangles).
3. Compare with a reliable board photo or schematic for JMM-AL10 to avoid damaging nearby components.
4. Use proper ESD precautions: anti-static mat, wrist strap, and insulated tools.

Once the battery is disconnected and the test point is identified: Huawei Honor V9 Play (JMM-AL10) - DeviceAtlas Huawei Honor V9 Play (JMM-AL10) | DeviceAtlas. DeviceAtlas

: A technician typically uses metal tweezers to connect the specific pad to a nearby metal shield (ground) while plugging the device into a PC via USB. Limitations & Risks Hardware Damage

: You must use tweezers to short this specific pad to any metal shield or "GND" (Ground) on the motherboard. 3. Entering BROM/Download Mode

suggest "No Test Point" FRP bypass methods using Safe Mode on Android 7.0. or a specific step-by-step guide for a particular software tool?

Software Finish: If you used the test point to flash a ROM, you may need to perform a Hard Reset via Recovery Mode (Hold Power + Volume Up) to clear old cache data and ensure a smooth first boot.

: Look for small gold-colored dots on the PCB near the CPU or battery connector. For the , the specific test point is used to ground the circuit.