K150 Pic Programmer Software Windows 10 ((better)) May 2026
A very specific topic!
Step 2: Install the CH340 Base Driver
Before the K150 driver can work, Windows 10 must recognize the USB-to-serial bridge. k150 pic programmer software windows 10
The K150 is an older budget programmer that can be difficult to set up on modern operating systems because the original software is outdated and often requires specific drivers that Windows 10 tries to block. A very specific topic
- Perform an erase or blank check before programming to ensure clean memory.
The story of the K150 PIC Programmer on Windows 10 is a classic "tale of two drivers." Perform an erase or blank check before programming
Step 3: Connect and Verify
- Connect the K150 to the PC via USB. The red power LED should light up.
- In the MicroBrn software, go to the Option menu and select Port.
- Select the COM port number you noted earlier in Device Manager.
- To test the connection, place a chip in the socket (or leave it empty if the software supports it) and click "Probe" or "Check".
To install the K150 PIC programmer software on Windows 10:
⚠️ Important notes
- Many K150s do not support PICs with Low-Voltage Programming (LVP) without a hardware mod.
- They often fail with PIC16F1xxx or newer chips.
- If it has a CH340 USB-serial chip, it’s a “dumb” programmer – only works with the original K150 software (limited).