Micronta Multimeter 22 212 User | Manual [portable]

Here’s a short user-style review of the Micronta 22-212 multimeter plus where to find its manual.

Crucial manual warning: Never apply more than 1000V DC between the input jacks and earth ground. micronta multimeter 22 212 user manual

range. Beside the diagram of the probes, there was a faint pencil mark near the 20V setting. Elias remembered then—the summer of '88. His father had used this exact meter to teach him how to test the batteries in his remote-controlled car. Here’s a short user-style review of the Micronta

Use cases

Uses a single 1.5V AA battery for resistance measurements (the movement itself requires no battery).
Instructions for accessing the battery compartment (rear panel, one screw).

: 8 total ranges including DC Voltage, AC Voltage, DC Current, and Resistance. Voltage Capacity : Up to 1000V AC/DC. Sensitivity : 2000 Ohms/Volt. DC Current : Maximum of 150mA. : Analog with a 2-inch mirrored scale. : Typically requires one 9V battery for the resistance (ohm) and continuity functions. www.ebay.com Operating Instructions Uses a single 1

Resistance: Set the range to OHMS, touch the probe tips together, and turn the OHM ADJ knob until the needle points to "0" on the top green scale. 2. Measuring Voltage (AC/DC)

C. DC Current Measurement (mA or µA)

Critical warning: Connect in series with the load. Never parallel across a voltage source.
For current > 100mA up to 500mA: Move red lead to 500mA jack.
Set selector to the appropriate mA range.
Break the circuit and insert the meter in series.