Mikuni Bds26 Service Manual |verified|

Mikuni BDS26 Service Manual: A Comprehensive Guide to Maintaining and Repairing Your Carburetor

• JIS (Japanese Industrial Standard) screwdrivers (Standard Phillips often strip these screws).
• Ultrasonic cleaner or carburetor dip.
• Compressed air source.
• Socket set (usually 8mm, 10mm).

Tips for Using the Mikuni BDS26 Service Manual mikuni bds26 service manual

1. Soak: Submerge the metal body (not rubber or plastic parts) in carburetor dip for 20-30 minutes.
2. Scrub: Use a brass wire brush on the jets. Use a wood toothpick or soft copper wire to poke out the tiny holes in the Pilot and Main jets. Do not use steel wire, as it can enlarge the holes and ruin the jetting.
3. Blow Out: Use compressed air to blast through every hole you can see. You should feel air coming out of the other side of the carb body.

   You're looking for the service manual for the Mikuni BDS26 carburetor! Mikuni BDS26 Service Manual: A Comprehensive Guide to