Mx1616 Motor Driver Datasheet Best Access

The MX1616H (often referred to simply as MX1616) is a dual-channel H-bridge brushed DC motor driver designed for low-voltage, high-current applications such as toy motors and small robotics. It is frequently marketed as a more efficient, compact alternative to the classic L298N driver, utilizing MOS technology to reduce heat and voltage drop. Technical Specifications Overview

Note: For speed control, apply a PWM signal to the PWM pin. Set IN1/IN2 to direction. Mx1616 Motor Driver Datasheet

Speed Control: To control speed, apply a PWM signal to the input pin designated for direction while holding the other pin low (or use PWM on both for advanced braking). The MX1616H (often referred to simply as MX1616)

This article serves as an exhaustive datasheet breakdown of the Mx1616. We will cover its pin configuration, electrical characteristics, wiring diagrams, programming logic, thermal specs, application use-cases, and troubleshooting tips. Range: Typically 2V to 10V (or 12V depending

1. Operating Voltage (VM)

  • Range: Typically 2V to 10V (or 12V depending on the specific revision).
  • Application: This powers the motors. If your motors are rated 6V, you would supply 6V to this pin. The driver has a built-in Low Voltage detection, typically around 2.1V, below which it will cut output to protect the motor.

| Register Address | Function | Bits | | :--- | :--- | :--- | | 0x00 | Generic Status | Overcurrent, Overtemp | | 0x01 | Current Control | Torque DAC setting (0-31) | | 0x02 | Decay Mode | Slow, Fast, Mixed ratio | | 0x03 | Blanking Time | 1.0µs to 3.75µs |

The MX1616 is a compact, dual-channel H-bridge motor driver IC designed for low-voltage, battery-powered applications. It offers an efficient alternative to traditional drivers, with a 2V-10V operating range and 1.3A-1.6A continuous current capabilities, featuring built-in thermal protection in a small SOP-16 package. For the full technical specifications and product details, visit LCSC Electronics UNIVERSAL-SOLDER Electronics H-Bridge DC Motor Driver Module MX1616

Introduction: Motor drivers are a crucial component in many modern systems, providing the necessary power and control to drive DC motors. The Mx1616 motor driver is a highly integrated, high-performance IC designed to drive DC motors with high efficiency and precision. With its advanced features and high power handling capabilities, the Mx1616 is an ideal choice for a wide range of applications.