One100 Installation Manual Oneaccess Top | Oneaccess

The OneAccess One100 series multiservice router requires specific hardware placement within 2 meters of power, using DC input, and connecting FXS or ISDN interfaces for voice services. Initial configuration requires setting WAN IP, voice routing tables, and potential DHCP options 66/160 for VoIP services, managed via the OneOS CLI. For detailed procedures, refer to the Scribd ONE100 Installation Manual.

Connect the DC input jack from the external power adapter (typically ) to the router’s DC 12V input. Plug the power cord into a wall outlet; note that most have a physical on/off switch. Establishing Network Links WAN Connection : Use an Ethernet cable to connect the Ethernet WAN (1/0) port to your broadband source or SIP NTU. LAN Connection : Connect local workstations or switches to any of the four Ethernet LAN ports (often marked as ETHERNET or SWITCH). Connecting Voice Terminals Analog (FXS) oneaccess one100 installation manual oneaccess top

3.1 Serial Console Access (Recommended for first-time setup)

Using your terminal emulator:

, which provides advanced firewall, VPN features, and Quality of Service (QoS) for prioritising voice traffic. Connect the DC input jack from the external

Confirm “Are you sure?” → yes. The device will reboot to default settings (192.168.1.1, admin/admin). LAN Connection : Connect local workstations or switches