Tape W5746 User Manual Upd | Point-n-measure Digital

The Point-N-Measure Digital Tape W5746 is a versatile ultrasonic distance measurer designed to replace traditional metal tapes for indoor DIY projects. This guide covers everything from initial setup to troubleshooting to help you get the most accurate readings. Getting Started: Battery Installation

  • Laser Distance Measurement: The device uses a laser to measure distances accurately and quickly.
  • Large LCD Display: The device features a large, backlit LCD display that shows measurements in various units, including feet, inches, yards, and meters.
  • Easy-to-Use Interface: The device has a simple and intuitive interface that makes it easy to operate, even for those who are not tech-savvy.
  • Memory Storage: The device can store up to 20 measurements for later recall.

Storage: Remove the battery if the device won't be used for over a month. Point-N-Measure Digital Tape W5746 User Manual

10. Troubleshooting

| Issue | Solution |
|-------------------------------|----------------------------------------| The Point-N-Measure Digital Tape W5746 is a versatile

  1. Point the device towards the target surface.
  2. Press the [POWER/READ] button briefly. The laser beam will turn on.
  3. Press [POWER/READ] again to take the measurement.
  4. The distance will display on the LCD screen immediately.

Troubleshooting and Maintenance

  1. Error Messages: If the device displays an error message, refer to the user manual for troubleshooting steps.
  2. Cleaning: Clean the device regularly with a soft cloth to ensure accurate measurements.
  3. Battery Replacement: Replace the batteries when the device indicates low battery power.

Here’s why that’s interesting in practice: Laser Distance Measurement : The device uses a