Satlink Ws 6933 Software | Update Work

How Does the Satlink WS-6933 Software Update Work? A Complete Step-by-Step Guide

For satellite TV installers, field engineers, and hobbyists, the Satlink WS-6933 is a legendary piece of kit. This digital satellite finder/meter is prized for its large 5-inch LCD screen, spectrum analyzer, and ability to support DVB-S/S2 signals. However, like any digital device, its performance depends heavily on its firmware.

4. Finalize

Transponder Data: If the device fails to detect a known satellite (even with correct dish alignment), it is usually because the transponder frequency or symbol rate in the firmware is outdated. satlink ws 6933 software update work

Part 7: FAQ – Does the Satlink WS-6933 Software Update Work for Cloned Units?

Warning: The WS-6933 is heavily cloned in Asian markets. Clones have different hardware IDs. How Does the Satlink WS-6933 Software Update Work

This article explains everything—from preparation to execution, common issues, and troubleshooting. Remove USB drive Restart the meter Go to

  1. Installation: Once the PC software (Upgrade Tool) is downloaded and installed, the user must connect the meter to the computer using a USB cable.
  2. Connection: With the meter powered on, the PC software should recognize the device. If drivers are required, they usually install automatically or are included in the download package.
  3. Selection: Inside the upgrade tool, the user selects the "Browse" or "File" button to locate the downloaded firmware file.
  4. Execution: After selecting the file, the user clicks "Upgrade" or "Start." The progress bar will appear on the PC screen, and usually, a progress bar will also appear on the meter's display.
  5. Finalization: It is critical not to unplug the device until the software confirms the update is 100% complete. Once finished, the device will typically reboot automatically. After the restart, a quick check of the "System Info" or "Version" menu will confirm that the new software version is now active.

Q: Will updating erase my stored satellite positions (USALS)?
A: Yes. Always back up your sat list by manually writing down motor positions or using the “Export to PC” feature if available.

To perform an update on the Satlink WS-6933, follow these general steps: