Selmarturbo4batterychargerinstructions Link

The Selmar Turbo 4 is a 12V, 4-amp battery charger featuring safety protections against short circuits, reverse polarity, and thermal overload. Operating instructions include connecting the red clamp to the positive terminal and the black clamp to the negative terminal before plugging the unit into an AC outlet, while monitoring the ammeter for charge completion. For more details, visit Tayna Batteries Tayna Batteries Selmar TURBO Battery Charger 12V 2.7A

Monitor the ammeter needle. It will start at a high reading (up to 4A) and slowly drop toward zero as the battery fills. Disconnection: Once the needle is near zero, the battery is charged. selmarturbo4batterychargerinstructions link

  • Red: Charging
  • Green: Fully charged/maintenance
  • Flashing/amber: Fault or poor contact
  • Press the Rate Selector button.
  • Choose 4A (Turbo/Fast Charge) for small to medium batteries (like motorcycles, lawn tractors, or car batteries needing a quick boost).
  • Choose 2A (Slow/Trickle) for maintaining batteries or charging very small units.

Connect the Black clamp to the negative (-) terminal or a suitable chassis ground point. The Selmar Turbo 4 is a 12V, 4-amp

Additional Safety Tips

  • Always follow proper safety precautions when working with batteries and electrical equipment.
  • Keep the charger and battery away from water and extreme temperatures.
  • Avoid overcharging, as it can damage the battery.

Inserting Batteries

  1. Match polarity (+/−) markings on the battery to the charger's slots.
  2. Insert up to four batteries; each bay charges independently.
  3. Close any bay covers if present.