Siemens Primary Setup Tool |top| Download May 2026
The Siemens Primary Setup Tool (PST) is a specialized utility used to assign network addresses (such as IP addresses) to SIMATIC NET industrial Ethernet components like switches, communication processors (CPs), and gateways. 📥 Download Information
Interface: Ethernet Network Interface Card (NIC) connected to the industrial network.
Step 4: Select Components
You will see two options:
Launch the Primary Setup Tool: After installation, launch the Primary Setup Tool from the Start menu (Windows) or Applications folder (on some systems).
Connect to the PLC: Connect your PLC to your computer using a communication cable (e.g., MPI, PROFIBUS, or Ethernet).
Configure the PLC: Follow the on-screen instructions to configure the PLC, including setting the IP address, subnet mask, and other network parameters.
Load the PLC Program: Load your PLC program into the Primary Setup Tool.
Check system requirements: Ensure that your system meets the minimum requirements.
Check for updates: Check for any updates to the software or your operating system.
Contact Siemens support: Contact Siemens support for assistance with any issues.
PRONETA: A free tool specifically designed for PROFINET network analysis and configuration. Legacy PST Versions:V4.2: The most recent legacy version. siemens primary setup tool download
Cause: The PLC has a prior password set by previous owner.
Fix: Use the "Reset to Factory Defaults" function. If that fails, you must use a memory card reset.
