Made on
Tilda
Unlocking your bootloader using Termux is a popular "no-PC" method that essentially turns one Android phone into a "mini-computer" to send commands to another. This process requires a secondary Android device and an OTG cable. 🛠️ What You’ll Need
Open Termux and run the following commands to install the necessary tools: Update packages: pkg update && pkg upgrade Install ADB & Fastboot: pkg install android-tools 3. Connect and Execute Connect the devices using the OTG adapter (host side) and a USB cable (target side). Boot the target device into Fastboot Mode (usually by holding Power + Volume Down during startup). On the host Termux, check connection: fastboot devices Use code with caution. Copied to clipboard If a serial number appears, the connection is successful. Run the unlock command: fastboot flashing unlock Use code with caution. Copied to clipboard Note: Some older devices may use fastboot oem unlock 4. Confirm on Target Device unlock bootloader using termux better
For many, the "better" way to unlock a bootloader is the one that requires the least amount of external hardware. Unlocking your bootloader using Termux is a popular
fastboot flashing unlock
Dismiss Got it. On this page. Get into the bootloader. Unlock the bootloader. Lock the bootloader. Set lock and unlock properties. Android Open Source Project Reboot to bootloader: Dismiss Got it
Run with:
Do not run this unless you know exactly what you’re doing. One wrong byte = hard brick.