Update Ktag Clone From 225 To 270 Upd 2021 [ PLUS | 2025 ]

Updating a K-TAG clone from version 2.25 to 2.70 is primarily done to update the protocols and vehicle families, allowing the device to support more car models. While the software interface may show 2.70, the actual working version for reading and writing ECUs typically remains 2.25. K-TAG Clone Update Procedure Preparation:

this process. It may take several minutes depending on the speed of the SD card inside the unit and the PC. Verification update ktag clone from 225 to 270 upd

Step 2: Uninstall Old Drivers

  1. Open Device Manager.
  2. Find KTAG under Universal Serial Bus devices.
  3. Right-click → Uninstall device → check Delete driver software.
  4. Unplug your KTAG.

Once the progress bar completes, the software interface will load with sections for vehicle selection and protocols. Updating a K-TAG clone from version 2

Incompatible Boards (Will brick):

: Install the 2.70 K-Suite software. Note that some versions (like 2.80) may be bundled together for broader compatibility. Protocol Synchronization Open Device Manager

Updating his Ktag clone device from version 2.25 to 2.70 had been a worthwhile experience for John. The new features and improvements had enhanced his diagnostic capabilities, streamlined his workflow, and provided a better experience for his customers.

Disconnect the K-TAG device and re-enable your internet connection. Open the K-Suite 2.70 folder and reinstall the drivers.

Always check file hashes with other users before flashing.

Liên hệ