Xinje Plc Usb Driver Install Portable

Introduction

  1. Disable automatic driver updates:
    • Reboot the computer: Reboot the computer and try installing the driver again.
    • Check the USB connection: Check that the USB cable is securely connected to both the Xinjie PLC and the computer.
    • Update the driver: Try updating the driver software to the latest version.

    Select the correct connection type (USB or Serial via a USB-to-RS232 adapter like the USB-XC). Test the connection to ensure the PC can "see" the PLC. 3. Key Hardware Drivers xinje plc usb driver install

    If the PLC is not recognized after software installation, connect the PLC to your PC via the USB cable. Open Device Manager on your Windows PC. Introduction

    (e.g., version V3.8.0). During the installation of XDPPro, the system will prompt you to install the USB driver XINJEConfig software automatically. XC Series: Download and install Disable automatic driver updates:

    USB-XC Cable: If you are using a conversion cable (USB-XC), it may require a separate Prolific or CH340 serial-to-USB driver if not automatically installed by Windows. 4. Safety and Connection Tips

    Blog Title: Step-by-Step Guide: Installing the Xinje PLC USB Driver (No More “Device Not Recognized”)