Xprinter Xpn160ii Driver
The Xprinter XP-N160II Go to product viewer dialog for this item.
1. Compatibility and platform support
- Windows: Manufacturers typically supply a Windows driver (often for Windows 7/8/10/11). These drivers expose the printer as a standard POS/USB printer and may include a setup utility for selecting emulation (ESC/POS) and paper size. Windows support is critical because many legacy POS apps are Windows-based.
- Linux / macOS: Official drivers for Linux/macOS are less common. On Linux, the printer often works as a generic ESC/POS device via CUPS with a raw queue or using community libraries (e.g., python-escpos, node-escpos). macOS users may need to rely on generic drivers or network printing (if using LAN models).
- Android / iOS: Some XPrinter models support Android with an SDK or via Bluetooth/USB OTG; iOS support is rarer and usually requires a manufacturer SDK. Mobile POS requires clear documentation and example apps.
- Interfaces: Variants include USB, serial (RS-232), Ethernet/LAN, and Bluetooth. Driver requirements differ by interface: USB typically needs a device driver; serial/Ethernet can be used as generic ports.
Q: Why does the driver install but the printer prints a blank self-test? A: Hold the feed button for 10 seconds; it should print a detailed configuration page. If it doesn't, the logic board is faulty. If it does, your driver is corrupted—reinstall. xprinter xpn160ii driver
The Xprinter XP-N160II Go to product viewer dialog for this item. The Xprinter XP-N160II Go to product viewer dialog
def close(self): if hasattr(self, 'ser') and self.ser: self.ser.close() elif self.device: usb.util.dispose_resources(self.device)Error 4: Half the receipt prints, then stops
Symptom: The XPN160II prints 4 inches, then pauses for 10 seconds.
Solution: The driver's receive buffer is full. Go to Port Settings and increase the Transmission Retry value to 90 seconds. Alternatively, switch from "ECP" to "Standard" USB mode in your BIOS. Q: Why does the driver install but the
Many users make the mistake of plugging the printer in and hoping Windows automatically finds the software. While Windows 10 and 11 are smart, they often install a "Generic" or "Class" driver for thermal printers. While this might allow the printer to print, it often leads to issues later, such as: