Manual: Zyx-j30
The ANHTCZYX ZYX-J30 (also branded as E-FAST or FOXSUR) is a versatile 12V/24V intelligent 3-stage pulse repair battery charger. It is designed to charge various lead-acid batteries, including AGM, Gel, and EFB, with safety features like polarity protection and temperature-based charging modes. 1. Key Technical Specifications Input Voltage 100-240V AC, 50-60Hz Output (Rated) 12V / 8A or 24V / 4A Battery Range 6Ah to 150Ah (12V); 6Ah to 100Ah (24V) Minimum Start Voltage Efficiency Compatible Batteries SLA, Wet, MF, Flooded, Gel, AGM, EFB 2. Operational Modes
- Enter calibration mode as above.
- After first weight (e.g., 50g), display will show next weight (e.g., 100g).
- Add the second weight without removing the first.
- Wait for
PASS. Remove all weights.
6. Maintenance & Cleaning
- Weekly: Inspect ports for dust or debris. Use compressed air to clean vents.
- Monthly: Run the internal self-diagnostic (Menu → System → Self-Test).
- Quarterly: Perform a factory calibration check using the ZYX-CAL tool.
Pro tip: Use the index in the printed ZYX-J30 manual to jump directly to “Error E215” or “Calibration routine.” zyx-j30 manual
Safety Warnings: It is strongly discouraged to leave the battery charging unattended overnight due to potential heat buildup and degradation . The ANHTCZYX ZYX-J30 (also branded as E-FAST or
- Apply a precise 0.000V signal (short to GND). Press
CAL LOWin software. - Apply a precise 10.000V signal. Press
CAL HIGH. - Save to non-volatile memory via command
AT+CALSAVE.
7. Maintenance Schedule According to the Manual
To guarantee a 10-year operational life, the ZYX-J30 manual recommends: Enter calibration mode as above
User-Friendly: Simple plug-and-play operation with a clear touch button.